Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Does anyone run a Downey Exhaust system?? #478535 07/21/04 01:38 AM
Anonymous
Unregistered
I was looking at buying a Downey Exhaust System, part # 17484 for the price of $340.00 including the Cat,it's a 2.5" system. Does any one run one and how well do they work/sound? I'm a little leary of the 2.5", too much back pressure compared to the 2.25"!
I need a whole new system, plus my cat ran away somehow! <img src="/forums/images/graemlins/lol.gif" alt="" />
Thanks everyone!
* Harry * <img src="/forums/images/graemlins/kewl.gif" alt="" />

Re: Does anyone run a Downey Exhaust system?? #478536 07/21/04 02:03 AM
Joined: Jan 2000
Posts: 539
Terry4X4 Offline
Rock Warrior
I don't have any experience with the Downey system, but last year I replaced the Cat back and needed to reroute the exhaust anyway for the new rear shock mounts.

Installed I paid about the same with Cat, new Flowmaster 50 series muffler, and custom bent 2.25" pipe.

Semper Fi <img src="/forums/images/graemlins/patriot.gif" alt="" />


Terry Johnson
Gettin' Off 4X4 Club
'89 XCab SR5 V6 - D60 Hybrid SAS, Ultimate Marlin Crawler, Detroit rear, ARB front
'97 TJ - Atlas 3.8 Twin Stick, ARB F&R, custom rollcage
Re: Does anyone run a Downey Exhaust system?? #478537 07/21/04 02:26 AM
Joined: May 2001
Posts: 6,768
Brian894X4 Offline
Trail Leader
*****
I'm no fan of Downey. You could probably do much better having a local shop fab something up for you. One problem with the "one size fits all" exhaust set ups is that you won't get the clearance you could when someone is fabbing it up to your specs.

As for exhaust tube size, I run 2.25" from the header through the cat and to the muffler. From the muffler to the exit pipe I run 2.5" and it works really well.

I would spend the money on an LC Engineering header first, if your funds are limited.

Good luck.


[color:"blue"]My Toyota/Expedition Website[/color]
Foreign & Military Toyotas - Expedition 4x4s
Our historical explorations & much more

Re: Does anyone run a Downey Exhaust system?? [Re: Brian894X4] #478538 07/21/04 04:18 AM
Joined: Aug 2003
Posts: 2,854
G
Greg_Canada Offline
Roll Me Over
Quote

As for exhaust tube size, I run 2.25" from the header through the cat and to the muffler. From the muffler to the exit pipe I run 2.5" and it works really well.

I would spend the money on an LC Engineering header first, if your funds are limited.

Good luck.

He has a 3vze...


89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
Re: Does anyone run a Downey Exhaust system?? [Re: Greg_Canada] #478539 07/21/04 04:35 AM
Joined: May 2001
Posts: 6,768
Brian894X4 Offline
Trail Leader
*****
Quote
Quote

As for exhaust tube size, I run 2.25" from the header through the cat and to the muffler. From the muffler to the exit pipe I run 2.5" and it works really well.

I would spend the money on an LC Engineering header first, if your funds are limited.

Good luck.

He has a 3vze...


Doh!!! <img src="/forums/images/graemlins/shocked.gif" alt="" /> <img src="/forums/images/graemlins/shiner.gif" alt="" />


[color:"blue"]My Toyota/Expedition Website[/color]
Foreign & Military Toyotas - Expedition 4x4s
Our historical explorations & much more

Re: Does anyone run a Downey Exhaust system?? #478540 07/21/04 02:37 PM
Joined: Jan 2000
Posts: 344
ScaldedDog Offline
Mudrunner
I've got Downey headers connected to a 2.5" exhaust (fabbed by Off Road Solutions) with a Random Technology cat and Flowmaster 40. It sounds much meaner than it is! People ask me all the time, "What do you have in that thing?", until they see me going up the pass at 60mph with my foot to the floor in 3rd gear - then they know.

I think 2.5" is just right for these things, and I've got good low-end torque. I can idle up steep climbs at 300rpm without ever stalling.

I'd suggest buying the Downey headers and having a good shop do the rest.

Just my $.02

Mark


''Wise men talk because they have something to say; fools,
because they have to say something.'' - Plato

http://www.scaldeddog.com
Re: Does anyone run a Downey Exhaust system?? [Re: ScaldedDog] #478541 07/21/04 02:50 PM
Joined: Aug 2001
Posts: 5,986
Red_Chili Offline
Toyota Section Staffer
Mark's truck does indeed sound nice. A little loud in the interior on the highway, but then so is mine these days...
2.25 has MORE backpressure than 2.5, not less.


-Bill
'87 4Runner w/ '96 5VZ-FE, 'Red Chili II'
'97 Taco XtraCab 3RZ-FE, 'BlackBean'
TLCA # 13257, Rising Sun 4x4 Club Land Use Coordinator
"He who stops being better stops being good." -Oliver Cromwell
Re: Does anyone run a Downey Exhaust system?? #478542 07/22/04 12:40 AM
Joined: Apr 2002
Posts: 3,568
Snowtoy Offline
Roll Me Over
I am running the Downey exhaust(most of it). I have the Downey headers and X-over pipe, their high flow muffler that goes with their exhaust system, and the Magnaflow high flow cat(which I believe is the same one Downey sells, the item numbers in Downey's catalog are the same on the Magnaflow box). The system is all 2.5", you really don't want anything smaller 2.25. The exhaust tone is deep and throaty, sound more like a street rod, than an import. The sound is fine for a daily driver on th estreet, but I find it too loud for the trail, tends to get a bit obnoxious after a while. I plan to tone it down with a "Purple Hornie" muffler(I will put it in between the cat and the Downey muffler. This should tone it down enough, and I am hoping it adds to the back pressure some. With the current set-up system I have plenty of power in the higher RPM's (3300+), but the low end torque needs a little help. The Downey system may have all the torque needed on a truck at stock weight, but with mine at over 4900 lbs it seems I need a little more back pressure. If the Purple Hornie doesn't do the trick I will swap out the 2.5" cat for a 2" one. Before buying the Downey system, see what a local shop would charge. The local one I went to wanted $200 to from the headers to the Cat, Downey's X-over only cost me $179, and included the cat adapter w/O2 sensor mount.


More than tread lightly. Leave it like you were never there, nor anyone else.
'90 X-cab 4.88's 33 BFG AT's, rr ARB, Headers, Ignition upgrade, cold air induction.
'91 X-cab 5.29's 315's BFG MT's, rr ARB, custom bumper and flatbed
Re: Does anyone run a Downey Exhaust system?? [Re: Terry4X4] #478543 07/30/04 07:56 PM
Anonymous
Unregistered
Ok, just got a new exhaust put on, new cat, pipes, flowmaster muffler, 2 1/4" all for the low,low price of $300.00 at my local muffler shop! <img src="/forums/images/graemlins/kewl.gif" alt="" />
Sounds awesome! <img src="/forums/images/graemlins/cheers.gif" alt="" />
That was much cheaper than $400 for just the parts from Downey!
* Harry *

Re: Does anyone run a Downey Exhaust system?? #478544 07/30/04 10:35 PM
Joined: Jan 2000
Posts: 539
Terry4X4 Offline
Rock Warrior
Nice. <img src="/forums/images/graemlins/kewl.gif" alt="" /> Which Flowmaster did you get? The 40 or 50 series?


Terry Johnson
Gettin' Off 4X4 Club
'89 XCab SR5 V6 - D60 Hybrid SAS, Ultimate Marlin Crawler, Detroit rear, ARB front
'97 TJ - Atlas 3.8 Twin Stick, ARB F&R, custom rollcage
Page 1 of 2 1 2

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.012s Queries: 16 (0.009s) Memory: 0.6389 MB (Peak: 0.7637 MB) Data Comp: Off Server Time: 2026-11-16 04:20:52 UTC
Valid HTML 5 and Valid CSS