I am running the Downey exhaust(most of it). I have the Downey headers and X-over pipe, their high flow muffler that goes with their exhaust system, and the Magnaflow high flow cat(which I believe is the same one Downey sells, the item numbers in Downey's catalog are the same on the Magnaflow box). The system is all 2.5", you really don't want anything smaller 2.25. The exhaust tone is deep and throaty, sound more like a street rod, than an import. The sound is fine for a daily driver on th estreet, but I find it too loud for the trail, tends to get a bit obnoxious after a while. I plan to tone it down with a "Purple Hornie" muffler(I will put it in between the cat and the Downey muffler. This should tone it down enough, and I am hoping it adds to the back pressure some. With the current set-up system I have plenty of power in the higher RPM's (3300+), but the low end torque needs a little help. The Downey system may have all the torque needed on a truck at stock weight, but with mine at over 4900 lbs it seems I need a little more back pressure. If the Purple Hornie doesn't do the trick I will swap out the 2.5" cat for a 2" one. Before buying the Downey system, see what a local shop would charge. The local one I went to wanted $200 to from the headers to the Cat, Downey's X-over only cost me $179, and included the cat adapter w/O2 sensor mount.


More than tread lightly. Leave it like you were never there, nor anyone else.
'90 X-cab 4.88's 33 BFG AT's, rr ARB, Headers, Ignition upgrade, cold air induction.
'91 X-cab 5.29's 315's BFG MT's, rr ARB, custom bumper and flatbed