Quote
The Gen 2 has four main plugs in the footwells. Funny, I was just thinking about those. I want to check the boat shop and see if they have one of these:

[Linked Image]

for the size of those holes or something else that might lay a little flatter. Cut through the carpet and you could remove/install them nice and quick.

ALSO, Gen 1 and early Gen2 guys...if your not up to the task of brazing a fitting for your front diff. I would bet the right angle elbow fitting that fits on the later Gen2s' front diff is the same size for your diff hole. I can post a pic later tonight as I have taken mine out.

Please do post the pic! <img src="/forums/images/graemlins/smile.gif" alt="" />

As far as those plugs, wouldn't those stick up out of the carpet? <img src="/forums/images/graemlins/confused.gif" alt="" />

Where are the drain holes? You say in the foot wells....are they close to the outer edge of the truck? Towards the doors? Either way, it would be pretty nifty to cut a little slice in the carpet (like you said) so you can just lift the carpet up and pull the plug.

When I'm done with school, I think I might go all out on this rig as soon as I can afford another car (G35c or EVO 8 <img src="/forums/images/graemlins/coolg.gif" alt="" /> ) and at that point, I will buy a snorkel and probably just take the carpet completely out anyways <img src="/forums/images/graemlins/drunk.gif" alt="" />

1997 Montero LS
3.5 V6
31x10.5 BFG A/T's
T-bar lift
Optima Yellow Top
Cheap Pilot Fog lights