2.3/2.6 swap

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 2.3/2.6 swap #481234 07/28/04 03:17 PM

Joined: Feb 2002

Posts: 114

Live Oak, FL

Trooperfreak Offline

Wheeler

I had the same issue. The 2.3 clutch bracket won't bolt up because the 2.6 oil pan lip impedes it. I swapped out the 2.6 oil pan for the 2.3 and it bolted right up. I don't know the year of my 2.6...that may make a difference.

'86 Isuzu Trooper II, Durabak coated exterior, 4ZE1 2.6L, Weber 32/36, K&N, Rancho RS9000, Indy4X shackles, BJ flip/T-bar crank, Pacesetter header, dual core radiator, Mazda seats, 31x10.5 BFG TAKO's

Entire Thread
Subject	Posted By	Posted
2.3/2.6 swap	Anonymous	07/28/04 06:59 AM
Re: 2.3/2.6 swap	Trooperfreak	07/28/04 03:17 PM
Re: 2.3/2.6 swap	Anonymous	07/28/04 05:30 PM
Re: 2.3/2.6 swap	Trooperfreak	07/28/04 06:27 PM
Re: 2.3/2.6 swap	coldrain	07/29/04 10:25 PM
Re: 2.3/2.6 swap	jdobbsj	07/30/04 02:54 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.541s Queries: 15 (3.539s) Memory: 0.6029 MB (Peak: 0.6358 MB) Data Comp: Off Server Time: 2026-06-06 14:47:20 UTC
Valid HTML 5 and Valid CSS