Some upper A-arm theory to bash around

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Some upper A-arm theory to bash around [Re: Lee N] #481391 07/29/04 04:47 PM

Joined: Sep 2002

Posts: 3,634

Milwaukee WI

bretwalda

Roll Me Over

Actually I think your onto it where your diagram mentions the upper arm offset, but remember with my Tbars cranked those arms are at at 4.5 o'clock or so <img src="/forums/images/graemlins/smile.gif" alt="" />. I would think the shock load is going from the knuckle to the bolts at an angle - wanting to shear the 10 grade bolts and getting as far as bending them.

<img src="/forums/images/graemlins/confused.gif" alt="" />

concreteprinter.com

Entire Thread
Subject	Posted By	Posted
Some upper A-arm theory to bash around	bretwalda	07/28/04 07:41 PM
Re: Some upper A-arm theory to bash around	Lee N	07/28/04 11:04 PM
Re: Some upper A-arm theory to bash around	bretwalda	07/29/04 04:47 PM
Re: Some upper A-arm theory to bash around	socalmonty	08/03/04 09:44 PM
Re: Some upper A-arm theory to bash around	DougH	08/04/04 01:18 AM
Re: Some upper A-arm theory to bash around	socalmonty	08/04/04 05:51 PM
Re: Some upper A-arm theory to bash around	PHIL_	08/04/04 06:03 PM
Re: Some upper A-arm theory to bash around	DougH	08/04/04 09:45 PM
Re: Some upper A-arm theory to bash around	socalmonty	08/05/04 01:40 AM
Re: Some upper A-arm theory to bash around	bretwalda	08/05/04 06:23 AM
Re: Some upper A-arm theory to bash around	Augie	08/07/04 04:14 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: