$75! <img src="/forums/images/graemlins/kewl.gif" alt="" /> mine were $100 <img src="/forums/images/graemlins/frown.gif" alt="" />
I've had them on for a couple of months now. They are from a 2000. Love the ride and the added clearance. The new are an inch or so shorter than the stock so they go in easy. The challenge is getting the rear end high enough to get the stock springs out, High Lift? (I used my tractor)
Make sure you block the wheels and secure the frame rails real well once you achieve the needed height as you will be in harms way should it fall.
I also added 2" coil spacers. For those I needed a spring compressor and the passenger side was a challenge with the exhaust in the way. I also had to disconnect the shocks.
Good Luck
Bob