Energy suspension control arm bushings

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Energy suspension control arm bushings #482239 07/30/04 10:59 PM

Joined: Oct 2003

Posts: 14

Salida, CO

Ranchero

Need a Spot

Anyone ever replace their contol arm bushings with poly bushings? The Energy Suspension poly bushings I'm planning to use require that you reuse the steel shells of the old bushings. How difficult is it to remove the old material?
thanks
Steve
Tucson

94 4x4 Extra Cab, 22re, lockers, 4.88s, MTRs 167k

Entire Thread
Subject	Posted By	Posted
Energy suspension control arm bushings	Ranchero	07/30/04 10:59 PM
Re: Energy suspension control arm bushings	JackKnife	07/31/04 05:03 PM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.596s Queries: 15 (3.594s) Memory: 0.5942 MB (Peak: 0.6271 MB) Data Comp: Off Server Time: 2026-06-21 04:53:46 UTC
Valid HTML 5 and Valid CSS