interference engine?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: interference engine? #482311 07/31/04 06:49 AM

Joined: Dec 2003

Posts: 69

Binghamton, New York

ecowheeler Offline

Getting the Wheeling Fever

Thanks for the help everyone... I'll most likely be upgrading to a gear set when I replace the head gasket. (I've got no compression in the #1 cylinder due to a blown head gasket... truck still runs, though!!)

My '86 4Runner went to the bone-yard November 29, 2004 at 10am after roughly 430,000 miles on the original engine and transmission. :-( Looking for something else to wheel in...

Entire Thread
Subject	Posted By	Posted
interference engine?	ecowheeler	07/31/04 03:37 AM
Post deleted by little_joe	Anonymous	07/31/04 03:51 AM
Re: interference engine?	Esquire812	07/31/04 04:07 AM
Re: interference engine?	kyle-22r	07/31/04 04:26 AM
Re: interference engine?	Greg_Canada	07/31/04 05:10 AM
Re: interference engine?	ecowheeler	07/31/04 06:49 AM
Re: interference engine?	Anonymous	08/02/04 05:25 PM
Re: interference engine?	Esquire812	08/02/04 06:56 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.532s Queries: 15 (3.530s) Memory: 0.6054 MB (Peak: 0.6384 MB) Data Comp: Off Server Time: 2026-06-12 00:19:52 UTC
Valid HTML 5 and Valid CSS