Quote
do you have the 22RE or 3.slo. I have a 3.0 and have a high idle, although not as high as 3000. Mine is more like 1600.

Hey Darin, how do I take off the TPS and inspect it on the 3.0. Honestly, I don't even know what the TPS looks like so if you could break it down so even a child could understand, I may be able to figure it out. I cleaned out the black junk in TB still attached and thats when my high idles seemed to occur, but I'm not 100% positive on that.
Engine work just scares me. I always seem to make it worse that what it was before.

Listen to Esquire and search for 4crawlers TPS page.
Your TPS is located just to the right of your throttle body, it will be plastic with a connector running to it, remove the electrical connector, remove the air intake tube, there are two screw like Esquire said, a stubby screwdriver and an offset seems to work best for me, but you choose your own tools. After replacing just follow 4crawlers TPS page and whalla! <img src="/forums/images/graemlins/kewl.gif" alt="" />
Sorry for hijacking the post Esquire!

Good Luck!
* Harry * <img src="/forums/images/graemlins/cheers.gif" alt="" />