Front Wheel Bearings

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Front Wheel Bearings [Re: Woodsie] #483371 08/09/04 03:23 PM

Anonymous

Unregistered

You will need a factory shop manual, a 30 ton press and all the associated stuff to go with it before you even attempt to dissemble the hub on your truck.

If you are certain that the bearing has gone bad, pay the dealer to do the work for you. Trust me on this one. I have done two myslef and if you don't have all the right equipement you should not attempt this job.

Gadget

Entire Thread
Subject	Posted By	Posted
Front Wheel Bearings	Woodsie	08/02/04 05:57 PM
Re: Front Wheel Bearings	Anonymous	08/09/04 03:23 PM
Re: Front Wheel Bearings	larsdennert	08/16/04 04:40 AM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.479s Queries: 16 (3.477s) Memory: 0.5938 MB (Peak: 0.6268 MB) Data Comp: Off Server Time: 2026-06-18 13:46:05 UTC
Valid HTML 5 and Valid CSS