The reason to change the lower plenum is so you don't ingest the butterfly rod bushings into your valves. If you are doing the plugs & wires, you are already removing the old plenum, so it would be little additional work. The process to test you variable intake valve is described in detail in several posts on the subject, and is pretty simple. It involves removing a vacuum line and listening for a sound to stop. The updated part number is also available in older posts. I would at least check the part number while you have the intake off.

That being said, I also own a '96SR, and my truck already had the updated lower plenum. Not sure if that came from the factory, or if the previous owner had it changed.

Good luck.
Dave in KC


Dave Smith
'96 SR - 31x10.5 Tires

"Facts are meaningless. You could use facts to prove anything that's even remotely true!" Homer Simpson