Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
When to change lower plenum, valve seal guide on 95 SR #483812 08/03/04 07:47 PM
Anonymous
Unregistered
I have a 95 SR with 123K miles. I have been reading defects in this forum for the 3.5 dohc engine specifically the lower intake plenum and valve seal guides. With the said mileage, do I need to have them replaced now? What is the problem with the factory lower intake plenum?

Thanks.

Re: When to change lower plenum, valve seal guide on 95 SR #483813 08/04/04 01:16 AM
Anonymous
Unregistered
There is a lot of good information in this forum on that subject. Do a search of the archives and check out the project page. There is a detailed article with pics on what is entailed. <img src="/forums/images/graemlins/cheers.gif" alt="" />

Re: When to change lower plenum, valve seal guide on 95 SR #483814 08/05/04 03:05 PM
Anonymous
Unregistered
Thanks otall1. I did do a search and still can't find a reason why the lower intake plenum should be replaced at Monty's age. I will be replacing plugs, wires, coils(still contemplating), fuel filter, and perhaps the plenum if I find a good reason for it.

Re: When to change lower plenum, valve seal guide on 95 SR #483815 08/05/04 05:55 PM
Joined: Mar 2004
Posts: 33
D
davemtb Offline
Getting the Wheeling Fever
The reason to change the lower plenum is so you don't ingest the butterfly rod bushings into your valves. If you are doing the plugs & wires, you are already removing the old plenum, so it would be little additional work. The process to test you variable intake valve is described in detail in several posts on the subject, and is pretty simple. It involves removing a vacuum line and listening for a sound to stop. The updated part number is also available in older posts. I would at least check the part number while you have the intake off.

That being said, I also own a '96SR, and my truck already had the updated lower plenum. Not sure if that came from the factory, or if the previous owner had it changed.

Good luck.
Dave in KC


Dave Smith
'96 SR - 31x10.5 Tires

"Facts are meaningless. You could use facts to prove anything that's even remotely true!" Homer Simpson
Re: When to change lower plenum, valve seal guide on 95 SR [Re: davemtb] #483816 08/06/04 06:57 PM
Anonymous
Unregistered
Thanks to all your replies. How do I tell now If I have an updated plenum or not, so I could decide if it is necessary to replace it? Sorry being such a pest.

Re: When to change lower plenum, valve seal guide on 95 SR #483817 08/06/04 08:38 PM
Joined: Mar 2004
Posts: 33
D
davemtb Offline
Getting the Wheeling Fever
The updated part number is MD335940. This part number is cast into the new plenum.

I have a new in the box updated plenum if you are interested in buying it.

Dave


Dave Smith
'96 SR - 31x10.5 Tires

"Facts are meaningless. You could use facts to prove anything that's even remotely true!" Homer Simpson
Re: When to change lower plenum, valve seal guide on 95 SR [Re: davemtb] #483818 08/09/04 06:01 AM
Anonymous
Unregistered
If you have a 95, you have the faulty plenum, unless it's been replaced for some reason. My truck has 135k on it and the plenum is shot, (but that's because I destroyed the bushings with diesel fuel when I replaced the stem seals-accidentally forgot it was in the cleaning bin). The bushings were still in great shape prior to that.

Quote
The updated part number is MD335940. This part number is cast into the new plenum.

I have a new in the box updated plenum if you are interested in buying it.

Dave


How much are you asking for the plenum?

Re: When to change lower plenum, valve seal guide on 95 SR #483819 08/09/04 04:31 PM
Anonymous
Unregistered
If the 95 SR has a faulty factory plenum, was a recall ever made?

Re: When to change lower plenum, valve seal guide on 95 SR #483820 08/09/04 11:49 PM
Anonymous
Unregistered
unfortunately they didn't feel they should pay for it so they never recalled it. Pretty lame if you ask me, I think this is one of the things on the long list of why Mitsubishi is having to do serious restructuring to try and stay in business

Re: When to change lower plenum, valve seal guide on 95 SR #483821 08/10/04 02:53 PM
Anonymous
Unregistered
If we can prove this defect to Mitsu, we probably can file a class action lawsuit. The updated plenum and cost of labor to replace it is very costly.

Any lawyer here?

Page 1 of 2 1 2







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.010s Queries: 15 (0.007s) Memory: 0.6201 MB (Peak: 0.7256 MB) Data Comp: Off Server Time: 2026-11-20 03:25:49 UTC
Valid HTML 5 and Valid CSS