mag00 -

I'm still confused as to what you're trying to do and with what type of equipment you're using, so maybe there's still some basic misunderstanding that's getting lost in the communications. Try this and let's see if you can get your answer -

Clearly state:

1) what type of torque wrench you're using.
2) which end of the wrench will have the extension
3) what type of extension you're adding.
4) the length of the extension
5) what angle to applied rotational force (handle) the extension is set.
6) the desired torque value on the fastener

Maybe with this information someone can help. <img src="/forums/images/graemlins/cheers.gif" alt="" />

Frank