help on reading engine codes

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

help on reading engine codes #485290 08/06/04 05:28 PM

Joined: Feb 2004

Posts: 37

Tuttle, Oklahoma

StreetbikeDepot Offline

Getting the Wheeling Fever

Can someone post instructions for reading trouble codes? My check engine light comes on after the motor warms up, but only at idle, if I barely tap the throttle with my foot it goes away. I've checked and adjusted the TPS several times, and it still does it. Maybe its something else?

Entire Thread
Subject	Posted By	Posted
help on reading engine codes	StreetbikeDepot	08/06/04 05:28 PM
Re: help on reading engine codes	Vic Lee	08/06/04 05:35 PM
Re: help on reading engine codes	StreetbikeDepot	08/06/04 05:57 PM
Re: help on reading engine codes	DaphneD	08/06/04 07:12 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.490s Queries: 15 (3.488s) Memory: 0.5986 MB (Peak: 0.6316 MB) Data Comp: Off Server Time: 2026-06-13 07:55:41 UTC
Valid HTML 5 and Valid CSS