Shock fitment for balljoint spacers

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Shock fitment for balljoint spacers [Re: SWORDFISH92] #487062 08/11/04 12:03 AM

Joined: Sep 2003

Posts: 405

Warrenton, Virginia

BeaterToyota Offline

Mudrunner

Quote

I was wondering what to put up front and a good place/price to get them.

Rancho 0-2" lift shocks for the front of an '88 Suzuki Samurai. That's what I have and they fit perfect.

Jason

'88 Toyota, flatbed junker, Inchworm dual cases, spooled rear.

Entire Thread
Subject	Posted By	Posted
Shock fitment for balljoint spacers	SWORDFISH92	08/10/04 08:32 PM
Re: Shock fitment for balljoint spacers	mt_goat	08/10/04 08:43 PM
Re: Shock fitment for balljoint spacers	Anonymous	08/10/04 09:20 PM
Re: Shock fitment for balljoint spacers	SWORDFISH92	08/10/04 09:58 PM
Re: Shock fitment for balljoint spacers	BeaterToyota	08/11/04 12:03 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.514s Queries: 16 (3.512s) Memory: 0.6005 MB (Peak: 0.6335 MB) Data Comp: Off Server Time: 2026-06-18 22:20:25 UTC
Valid HTML 5 and Valid CSS