Quote
your idle could be set to high also...

with the idle to high and you touch the breaks it cuts the fuel from engine. so it surges.

this is designed so when u are driving and touch the breaks with it in gear, it cuts the fuel down to idle amount to save fuel.


Not really a fuel saving item, its more safety or braking effectiveness. Assuming you are off idle (that is the engine is above about 1000 RPM) the ECU sees the brakes go on and assumes you want to stop. Why pump gas into the engine making power while you are trying to come to a stop.

And yes, turn down the idle speed if it is too high. I can exactly duplicate this problem on my 22RE if I bump the idle speed up over about 1050 RPM, at that point the idle surges with brake application. Turn the idle speed down and it idles normally.