Quote

On my 4Runner, I did a 2" front drop hanger, moved the hanger about 1" forward, put the shackle through the frame, used 2" longer than stock shackles, and used rear springs up front (axle 2" forward).

This gave me an axle that is overall 3" forward of stock.


Same setup on my truck... Identical.. (but I did mine first! HA! I'm just razzing ya, Dave). I made my spring hanger a dual-pattern, so I also have a mounting point in the stock location as well. Have run both rears and stock length up front with 2" longer than stock shackles to match the hanger - both with no problems whatsoever.

Brian K. Gallus
I have nothing important to say.