Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: Flaring hard lines for Solid Axle Swap [Re: sweater] #494883 08/30/04 09:39 PM
Joined: Sep 2003
Posts: 826
hunterdan Offline
Rock Warrior
I would really really not recommend the compression fittings. I only see them as a temporary fix. A very iffy temporary fix. Do it right and get adapters, or buy long sections of tube and bend.

Dan


92 Rodeo, 3.1 TB crank, custom bumpstop spacers, DOR shackles, Flipped ball joints, D44 Rear, 4.56s and new magnaflow cat and dynomax ultraflow muffler Since been replaced by a 2 door Explorer on 31's shackles, cranked torsion bars and full exhaust
Re: Flaring hard lines for Solid Axle Swap [Re: hunterdan] #494884 08/30/04 09:50 PM
Joined: May 2003
Posts: 182
Ride Hard Offline OP
Wheeler
Actually, my father has an audi that he runs $4,000 porche brakes on, it uses AN compression fittings that were sent to him with the kit, from Germany.
Also, I dont think I should have too much of a problem running them on my truck, when thats what we run on an audi used in the pikes peak hill climb... <img src="/forums/images/graemlins/kewl.gif" alt="" />


'93 Rodeo - Dana 60 FF Rear - Dana 44 Front - 35's
Re: Flaring hard lines for Solid Axle Swap [Re: Ride Hard] #494885 08/31/04 01:10 AM
Joined: Sep 2003
Posts: 826
hunterdan Offline
Rock Warrior
Its a judgement call, but IMHO i would not trust them. A brake system is under high pressure and temperature. Its not that hard to flare the lines and add the appropriate fittings. The brakes are just a system I dont take short cuts on.

Dan


92 Rodeo, 3.1 TB crank, custom bumpstop spacers, DOR shackles, Flipped ball joints, D44 Rear, 4.56s and new magnaflow cat and dynomax ultraflow muffler Since been replaced by a 2 door Explorer on 31's shackles, cranked torsion bars and full exhaust
Re: Flaring hard lines for Solid Axle Swap [Re: hunterdan] #494886 08/31/04 09:31 PM
Joined: May 2003
Posts: 182
Ride Hard Offline OP
Wheeler
Thanks alot, guys... The brakes work amazing well... I cant belive the stopping power I now have... <img src="/forums/images/graemlins/shiner.gif" alt="" />


'93 Rodeo - Dana 60 FF Rear - Dana 44 Front - 35's
Page 2 of 2 1 2







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.008s Queries: 15 (0.005s) Memory: 0.6085 MB (Peak: 0.6647 MB) Data Comp: Off Server Time: 2026-11-16 08:41:26 UTC
Valid HTML 5 and Valid CSS