"Clunk" in drivetrain - 4x4Wire TrailTalk

Print Thread

Rate Thread

Re: "Clunk" in drivetrain #494917 09/04/04 08:49 AM

Joined: Jan 2004

Posts: 5

Sussex UK

AndyUK

Need a Spot

I have seen reports that this occurs when the sliding joint on the propshaft has too much grease, which creates a sort of fluid lock stopping the shaft from moving inward on the spline.

1993 Toyota Landcruiser 4.2TD VX80
1996 Toyota Hilux Surf SSR-G Intercooler
1995 Toyota Hilux Surf SSR-X Ltd

Entire Thread
Subject	Posted By	Posted
"Clunk" in drivetrain	Anonymous	08/28/04 05:59 AM
Re: "Clunk" in drivetrain	humanoid	08/28/04 06:53 AM
Re: "Clunk" in drivetrain	Anonymous	08/28/04 05:08 PM
Re: "Clunk" in drivetrain	Scerb	08/29/04 12:52 AM
Re: "Clunk" in drivetrain	Ricochet	08/29/04 03:50 PM
Re: "Clunk" in drivetrain	Anonymous	08/29/04 05:13 PM
Re: "Clunk" in drivetrain	Adam F	08/29/04 06:13 PM
Re: "Clunk" in drivetrain	Anonymous	09/02/04 02:50 AM
Re: "Clunk" in drivetrain	AndyUK	09/04/04 08:49 AM
Re: "Clunk" in drivetrain	Anonymous	09/04/04 11:26 PM
Re: "Clunk" in drivetrain	Anonymous	09/08/04 04:12 AM
Re: "Clunk" in drivetrain	Anonymous	09/08/04 10:51 PM
Re: "Clunk" in drivetrain	Jeff G 89	09/14/04 10:31 PM
Re: "Clunk" in drivetrain	James Chow	09/07/04 06:46 AM
Re: "Clunk" in drivetrain	Anonymous	09/16/04 12:28 AM
Re: "Clunk" in drivetrain	Anonymous	09/16/04 08:45 PM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social: