So I snapped a rear axle on my 87 trooper while at Tillamook. Luckily, it broke right at about 3/4" inside the diff right where the splines start. I was able to drive ok without the axle flopping around inside the tube. I still had one wheel working 'cuz of my Lincoln-locked diff.

Here is the strange part...
I go to the junk yard to get an axle shaft for the 10 bolt. I pulled one from an '86 cuz I though they where the same. We all know that the 12 bolt started in 88, so I thought that the 86 and 87 10 bolt rear where the same. They look the same from the outside. <img src="/forums/images/graemlins/confused.gif" alt="" />
I saw plenty of 12 bolts that I could have swapped in, but that would take more work and more money. Besides, this was the first broken axle I've had in 3 years with the welded diff.
So i bought the 86 axle and got to put it in....and it was too short? <img src="/forums/images/graemlins/confused.gif" alt="" /> I had no idea the 87 axles are 2" longer. Does this mean the whole axle is 4" wider? (I should have measured so I could answer that question.)
I took the axle back and found a 91 pick-up with the drum brakes. I pulled the axle and it was the right one.

So add to the list of irregularities on the 87 Trooper that the 10 bolt is different than the 86 10 bolt.


Some of you probably already knew this, but it was news to me.

Cheers! <img src="/forums/images/graemlins/patriot.gif" alt="" />
Karl


Why?....Because they dared me to!!!