OIL Filter Adaptor Gasket

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: OIL Filter Adaptor Gasket [Re: coldrain] #496994 09/02/04 07:31 PM

Anonymous

Unregistered

I did mine dry with just a couple dabs of rubber gasket sealer to hold it in place. 4000 miles later, its still good.

Entire Thread
Subject	Posted By	Posted
OIL Filter Adaptor Gasket	coldrain	09/02/04 06:30 PM
Re: OIL Filter Adaptor Gasket	Wayne	09/02/04 07:20 PM
Re: OIL Filter Adaptor Gasket	coldrain	09/02/04 07:28 PM
Re: OIL Filter Adaptor Gasket	Anonymous	09/02/04 07:31 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.790s Queries: 16 (4.788s) Memory: 0.5944 MB (Peak: 0.6274 MB) Data Comp: Off Server Time: 2026-05-30 16:14:42 UTC
Valid HTML 5 and Valid CSS