Oregon machine shops?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Oregon machine shops? [Re: cragdweller] #497473 09/04/04 08:19 PM

Joined: Dec 2000

Posts: 2,968

Brier,Wa,USA

Big Blue

Roll Me Over

There just aluminum heads, anybody can work on them. I would be more concerned about finding a good machine shop, instead of one that "knows" that head. Aluminum heads do not present a challenge for most shops, as they have been around for 80 some years now.
Theres no magic in them.
Kary

1987 Mitsubishi Pajero "Modified"
The other original Mitsu brother
Northwest Trailmaster

Entire Thread
Subject	Posted By	Posted
Oregon machine shops?	cragdweller	09/04/04 12:35 AM
Re: Oregon machine shops?	LRJ4x4	09/04/04 01:01 AM
Re: Oregon machine shops?	Big Blue	09/04/04 08:19 PM
Re: Oregon machine shops?	cragdweller	09/06/04 11:52 PM
Re: Oregon machine shops?	cragdweller	10/02/04 05:19 PM

Moderated by 4x4Wire, 52degrees, Adam F, Axe Man, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.108s Queries: 16 (4.106s) Memory: 0.6011 MB (Peak: 0.6341 MB) Data Comp: Off Server Time: 2026-06-12 05:28:44 UTC
Valid HTML 5 and Valid CSS