The rear removal is questionable - the front - dont do it - especially on a Gen2 3.5, your brush guard on the front, you're asking for trouble. There's a whole lot more handling issues at stake. Edit: I see you wanna just unbolt for a ride - easy enough. Although the link between the bar and lower arm on mine was so rusted I had to cut mine off with a grinder - I'd make sure I can get it off before I head out and attempt it on the trail.

Misterbishi has in the works a batch of front sway disconnects but they are a long time coming <img src="/forums/images/graemlins/sleeping.gif" alt="" />. I have one of his early prototypes and it works great - and is the only way to deal with the front end IMO.

As far as the rear - you will get a ton more drop articulation - at least on the Gen 2. I cant even get my rear wheels off the ground unless I max out my 48" hilift to near-dangerous heights <img src="/forums/images/graemlins/ignore.gif" alt="" /> (and before anyone flames me please realize there's never a reason for me to not just jack on the rear axle - I'm just illustrating a point <img src="/forums/images/graemlins/wink.gif" alt="" />)

Pic of the front disconnected:

[Linked Image]

Rear sway removed:

[Linked Image]

Last edited by bretwalda; 09/12/04 05:47 AM.

concreteprinter.com