Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 3 of 3 1 2 3
Re: GEN II sway bar removal for wheeling? [Re: TeaQue] #499844 09/30/04 08:35 AM
Joined: Sep 2002
Posts: 3,634
bretwalda Offline
Roll Me Over
With the brush guard I meant more weight. I dont know how much those things weigh but more weight on the front will most probably compound the effects of an unstabilized front end negotiating with centrifugal force.


concreteprinter.com
Re: GEN II sway bar removal for wheeling? [Re: bretwalda] #499845 09/30/04 05:49 PM
Joined: Nov 2003
Posts: 167
TeaQue Offline OP
Wheeler
Quote
With the brush guard I meant more weight. I dont know how much those things weigh but more weight on the front will most probably compound the effects of an unstabilized front end negotiating with centrifugal force.
I would have thought that big steel bumper you have on your truck would weight a lot more than my brush guard? <img src="/forums/images/graemlins/confused.gif" alt="" />


1997 Montero LS
3.5 V6
31x10.5 BFG A/T's
T-bar lift
Optima Yellow Top
Cheap Pilot Fog lights
Re: GEN II sway bar removal for wheeling? [Re: BobShaw] #499846 09/30/04 05:50 PM
Joined: Nov 2003
Posts: 167
TeaQue Offline OP
Wheeler
Quote
I would think that you would not overextend the shocks. The swaybar does not keep both wheels from dropping together the same distance.

Bob Shaw


can anyone verify this?


1997 Montero LS
3.5 V6
31x10.5 BFG A/T's
T-bar lift
Optima Yellow Top
Cheap Pilot Fog lights
Re: GEN II sway bar removal for wheeling? [Re: TeaQue] #499847 10/01/04 12:59 AM
Joined: Oct 2003
Posts: 1,145
NHMonty Offline
Body Damage is Cool
I have looked at removing my rear sway bar but decided against if for various reasons such as, its rusted on, and the fact that every other week I drive 3 hours home on a road people do 80 on and the cops just wave. Also on this road I was once hit by a very stong gust of wind because there are a lot of very open areas and it blew me into the fast lane. without the sway bar when I corrected to get back into my lane and keep from going of the road, I would probably have lost control and tipped. if anyone has driven 89 to 91 in new hampshire and vermont they might know what I mean by wind. Aynways, those are a couple of my reasons to why I havent removed mine.


1990 RS 4door 3.0L V6. 2 inch body lift. 33x12.50/r15 BFG AT's, 3 Superswampers(1 on the way) CD Player, Superwinch Hubs
My pics http://community.webshots.com/user/nhmonty
Page 3 of 3 1 2 3







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.018s Queries: 16 (0.014s) Memory: 0.6080 MB (Peak: 0.6804 MB) Data Comp: Off Server Time: 2026-11-17 14:34:48 UTC
Valid HTML 5 and Valid CSS