Gen 1 4 cyl conversion 5 speed to auto?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Gen 1 4 cyl conversion 5 speed to auto? [Re: carnuck] #500020 09/10/04 03:20 PM

Joined: Apr 2004

Posts: 1,494

Summit Co Ohio

BobShaw

Body Damage is Cool

I don't think you will be happy with the older 5 speed tranny with aluminum case. They have shaft bearing problems. If you do go with one, have it rebuilt and upgraded.
Bob Shaw

87 Raizer, 4.3V6, Mod TH700R4,231CHD, detroit rear and LSD front, bouncy seats, 2" lift and 32x15 BFG MT tires.

Entire Thread
Subject	Posted By	Posted
Gen 1 4 cyl conversion 5 speed to auto?	carnuck	09/10/04 09:01 AM
Re: Gen 1 4 cyl conversion 5 speed to auto?	BobShaw	09/10/04 03:20 PM
Re: Gen 1 4 cyl conversion 5 speed to auto?	don	09/10/04 03:42 PM
Re: Gen 1 4 cyl conversion 5 speed to auto?	carnuck	09/10/04 06:23 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.453s Queries: 16 (3.451s) Memory: 0.5989 MB (Peak: 0.6319 MB) Data Comp: Off Server Time: 2026-06-04 02:30:33 UTC
Valid HTML 5 and Valid CSS