weber carb bolt pattern

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: weber carb bolt pattern [Re: carnuck] #501137 09/13/04 02:32 PM

Anonymous

Unregistered

I need to know the bolt pattern because I am planning on converting to fuel injection and I have a throttle body in mind, but want to see if the bolt pattern is the same. Otherwise I'll have to get a custom adapter made. I'm hoping the Redline will fit or close enough.

Entire Thread
Subject	Posted By	Posted
weber carb bolt pattern	Anonymous	09/13/04 05:54 AM
Re: weber carb bolt pattern	carnuck	09/13/04 07:27 AM
Re: weber carb bolt pattern	Anonymous	09/13/04 02:32 PM
Re: weber carb bolt pattern	Anonymous	09/14/04 06:20 PM
Re: weber carb bolt pattern	carnuck	09/14/04 08:37 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.722s Queries: 16 (3.720s) Memory: 0.5986 MB (Peak: 0.6316 MB) Data Comp: Off Server Time: 2026-05-30 09:02:10 UTC
Valid HTML 5 and Valid CSS