What parts needed to swap manual hubs on 02 RodeoSport?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

What parts needed to swap manual hubs on 02 RodeoSport? #502660 09/16/04 10:09 PM

Joined: Apr 2004

Posts: 21

Wisconsin

wiguy

Need a Spot

I was wondering if someone could help? How do you put manual locking hubs on a 2002 rodeo sport? My hub looks different. It just has one big nut in the center of the hub on the axle shaft.
I think I heard of someone running into this a while back but couldnt find it.

Last edited by wiguy; 09/17/04 11:23 PM.

mike

Entire Thread
Subject	Posted By	Posted
What parts needed to swap manual hubs on 02 RodeoSport?	wiguy	09/16/04 10:09 PM
Re: different style hub?	Bansil	09/16/04 11:26 PM
Re: different style hub?	wiguy	09/17/04 11:51 AM
Re: different style hub?	Bansil	09/17/04 10:15 PM
Re: different style hub?	holger	09/17/04 11:05 PM
Re: different style hub?	wiguy	09/17/04 11:27 PM
Re: different style hub?	Anonymous	09/29/04 08:43 PM
Re: different style hub?	holger	09/29/04 10:39 PM
Re: different style hub?	4WDJOE	09/30/04 05:13 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.614s Queries: 15 (3.612s) Memory: 0.6099 MB (Peak: 0.6429 MB) Data Comp: Off Server Time: 2026-06-12 17:49:48 UTC
Valid HTML 5 and Valid CSS