Weber 32/36 installation

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Weber 32/36 installation [Re: ArbitraryNotion] #503577 09/20/04 06:45 AM

Joined: Apr 2004

Posts: 90

Golden, Colorado

Toybluggie Offline

Getting the Wheeling Fever

Which hose on the dist is the vac advance, which wires from the old carb harness go to the weber choke & solinoid, what do I do with the EGR, where does the hose on the front of the valve cover go, and do I just plug all the other open hoses? Sorry for so many Q's, but I havent ever needed to mess with the carb or vac system b4. Thanks for the help.
JT

84 22re pickup

Entire Thread
Subject	Posted By	Posted
Weber 32/36 installation	Toybluggie	09/19/04 04:23 AM
Re: Weber 32/36 installation	ArbitraryNotion	09/20/04 04:09 AM
Re: Weber 32/36 installation	Toybluggie	09/20/04 06:45 AM
Re: Weber 32/36 installation	ArbitraryNotion	09/20/04 07:58 AM
Re: Weber 32/36 installation	Toybluggie	09/21/04 05:20 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.562s Queries: 16 (3.559s) Memory: 0.5995 MB (Peak: 0.6325 MB) Data Comp: Off Server Time: 2026-06-03 06:50:37 UTC
Valid HTML 5 and Valid CSS