I was thinkin' about somethin' like that with my Rodeo so that I could get more lift out of the front till the SAS. <img src="/forums/images/graemlins/kewl.gif" alt="" /> I pm'd Rubo because he had dealt with both setups just recently with his Rodeo/Amigo project. And the biggest thing I ran into was the cv's being the same length rather than the two different sizes. Although you mentioned the axle too and that might solve that problem. The other thing we came up with is the upper control arm. The pin or whatever that holds the upper a-arm in place will be different so that would have to be made. But hey, any other ideas would be greatly appreciated by all. <img src="/forums/images/graemlins/smile.gif" alt="" />

Just addin' to the mix. <img src="/forums/images/graemlins/cheers.gif" alt="" />