ideas regarding the upcoming rebuild of my 3VZE

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: ideas regarding the upcoming rebuild of my 3VZE #504336 09/21/04 09:57 PM

Joined: Aug 2001

Posts: 5,986

Littleton, CO

Red_Chili

Toyota Section Staffer

Overboring won't make a 3.0 into a 3.4, because most of the magic is in the head/intake. 4 valves/cylinder, 2 cams/head, better flowing intake, do a body good.

-Bill
'87 4Runner w/ '96 5VZ-FE, 'Red Chili II'
'97 Taco XtraCab 3RZ-FE, 'BlackBean'
TLCA # 13257, Rising Sun 4x4 Club Land Use Coordinator
"He who stops being better stops being good." -Oliver Cromwell

Entire Thread
Subject	Posted By	Posted
ideas regarding the upcoming rebuild of my 3VZE	seafarinman	09/21/04 06:04 PM
Post deleted by little_joe	Anonymous	09/21/04 07:55 PM
Re: ideas regarding the upcoming rebuild of my 3VZE	Red_Chili	09/21/04 09:57 PM
Re: ideas regarding the upcoming rebuild of my 3VZE	Adam F	09/21/04 11:06 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.736s Queries: 15 (3.734s) Memory: 0.5966 MB (Peak: 0.6296 MB) Data Comp: Off Server Time: 2026-06-25 23:31:44 UTC
Valid HTML 5 and Valid CSS