7MGE troubles

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 7MGE troubles [Re: SHAD] #504995 09/23/04 04:51 AM

Joined: Aug 2001

Posts: 2,205

N. California

BoostedInline6 Offline

Body Damage is Cool

Does the idle eventually smooth out?

Check the fuel pressure up vacuum switching valve (FPU VSV) mounted below the intake manifold. It has both an electrical connection and two vacuum connections. If any of these connections failed, you'll have a rough idle on a warm start up.

Entire Thread
Subject	Posted By	Posted
7MGE troubles	Paul Elbisser	09/23/04 02:45 AM
Re: 7MGE troubles	SHAD	09/23/04 02:50 AM
Re: 7MGE troubles	BoostedInline6	09/23/04 04:51 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.517s Queries: 16 (3.515s) Memory: 0.5964 MB (Peak: 0.6294 MB) Data Comp: Off Server Time: 2026-06-19 09:18:40 UTC
Valid HTML 5 and Valid CSS