|
|
 Re: ARB front lockers ***Urgent update***
[Re: wd8cdh]
#505246
10/23/04 10:35 PM
|
Joined: Aug 2001
Posts: 5,527
Trail Leader
|
gary, give me five to ten minutes to post in the other thread and then decide if you're still interested in this line of manufacture.
95 Sportage w/welded and 5.89 geared dana 44's on 38.5" TSL's.- SADLY SOLD CURRENTLY - 2000 sportage, 5.38 gears, welded diffs, 35" tires, 5.5" lift http://www.cardomain.com/ride/341410
|
|
|
Re: ARB front lockers ***Urgent update***
[Re: logansportage]
#505247
10/27/04 12:07 PM
|
Joined: Feb 2003
Posts: 2,243
OP
Kia Moderator
|
Hi logansportage, Look here: Diff. Drawing I am most interested in dimension G, C1, B and F but other dimensions would be helpfull too. Thanks All right guys, sorry for the delay, but here are the measurements from my stock non-LSD differential. It is from a 1998 4x4 KIA Sportage with 28 spline axles. A = 6.225" (outer diameter of the ring gear mounting surface) B = 4.650" (inner diameter of the ring gear mounting surface) C1 = 1.555" (outer diameter of the axle shaft housing/bearing seat) C2 = 1.555" (outer diameter of the axle shaft housing/bearing seat) D1 = 1.175" (inner diameter of the axle shaft housing) D2 = 1.175" (inner diameter of the axle shaft housing) E1 = 0.810" (bearing seat width) E2 = 0.810" (bearing seat width) F = 0.900" (thickness of ring gear mounting surface to bearing seat) G = 4.450" (distance from bearing seat E1 to bearing seat E2) *H1 = 2.350" (distance from outer bearing seat edge E1 to where axle shaft would stop) *H1 = 2.350" (distance from outer bearing seat edge E2 to where axle shaft would stop) *H1a = 1.155" (distance from snap ring location to where axle shaft would stop) I.e. Spline length inside side gear *H2a = 1.155" (distance from snap ring location to where axle shaft would stop) I.e. Spline length inside side gear *Axle spline count = 28 *Axle shaft diameter = TBM (To Be Measured) *Axle spline length = TBM ( To Be Measured) Updates as of 5:47 PM Mountain Standard Time 10/21/2004 I will try and update this post with the distance from the outer edge of the bearing seat to the end of the dotted lines in the picture posted in wd8cdh's post listed above. I believe this is the distance from the outer edge of the bearing seat to the end of the axel shaft which is also the inner most side of the differential side gear. Logansportage <img src="/forums/images/graemlins/patriot.gif" alt="" /> From Bitsamissin (Outerlimits Mitsubishi guru) Front Mitsubishi 28 spline Ok measurements as follows :- A = 176.0mm 6.928" B = 124.0mm 4.882" C1 = 45.3mm 1.783" C2 = 45.3mm D1 = 32.0mm 1.260" D2 = 32.0mm E1 = 19.5mm 0.768" E2 = 19.5mm F = 20.5mm 0.807" G = 113.0mm 4.449" No of crownwheel bolts = 10 PCD crownwheel bolt holes = 150.0mm Hope this helps.
2002 Sporty , Ironman 2.5" spring, 2" body, 15 x 7 ROH wheels, K&N, 15 x 10.5 Simex Centipedes, Powerchip 91.
"Never argue with an idiot. They will bring you down to their level then beat you with experience!"
|
|
|
Re: ARB front lockers ***UPDATES?***
[Re: DamKia]
#505248
12/03/04 07:44 PM
|
Joined: Jul 2003
Posts: 1,062
Body Damage is Cool
|
Any updates regarding ARB?
'97 Sportage, 4" Lift 1" BL, 31" BAJA CLAWS, Rallye 4000s, Line-Xed Hood, Grille, K&N, 2.25" Exhaust, RS9000s, GPS...  "What is IFS and where can I get some??" (outerlimits4x4.com)
|
|
|
Re: ARB front lockers ***UPDATES?***
[Re: MorganEstill]
#505250
01/06/05 06:11 AM
|
Joined: Feb 2003
Posts: 2,243
OP
Kia Moderator
|
Any updates regarding ARB? Private msg from Daniel Bongard: ------------------------- G'day Gary, It's an impressive thread you've started here. Unfortunately I have to report that with the exception of your email asking if we've made any decisions on the Kia applications there have been no other enquiries to my email address and nothing forwarded to me from our sales team. That is not to say that it will not happen...only to say that the priority positioning of its development puts it well behind the vocal majority of drivers of Toyota's, Nissan's, Mitsubishi's, and even Mazda's and Daihatsu's. If you can in fact confirm any cross-over applications (I noted that someone was considering a possible cross over with a late Chevy model) then that would help. All good things to those who wait I guess. Best regards and Happy New Year! -daniel ---------------------------------- Please find Daniels' email addy at the head of this thread and GIVE HIM AN EMAIL!!!!!, otherwise all chances of ANY locker, front or rear, is gone. . . . . FOR GOOD! At this point we cannot afford to be choosy about which end we do first.............
2002 Sporty , Ironman 2.5" spring, 2" body, 15 x 7 ROH wheels, K&N, 15 x 10.5 Simex Centipedes, Powerchip 91.
"Never argue with an idiot. They will bring you down to their level then beat you with experience!"
|
|
 Re: ARB front lockers ***UPDATES?***
[Re: DamKia]
#505251
01/07/05 08:05 PM
|
Joined: Jul 2003
Posts: 1,062
Body Damage is Cool
|
I e-mailed him. <img src="/forums/images/graemlins/confused.gif" alt="" /> Wonder what the hell happened?... While I am more likely at the moment to just go ahead and convert the rear to a Dana 35 with a No Slip locker and a leaf spring conversion, I will write another e-mail to send to him.
'97 Sportage, 4" Lift 1" BL, 31" BAJA CLAWS, Rallye 4000s, Line-Xed Hood, Grille, K&N, 2.25" Exhaust, RS9000s, GPS... "What is IFS and where can I get some??" (outerlimits4x4.com)
|
|
|
Re: ARB front lockers ***UPDATES?***
[Re: MorganEstill]
#505252
01/09/05 10:03 AM
|
Joined: Jun 2004
Posts: 393
Mudrunner
|
I emailed the US Sales team at the Seattle office. I got a letter back saying "thanks for you interest in ARB; here's our catalog" ah well <img src="/forums/images/graemlins/rolleyes.gif" alt="" />
02 [color:"red"] Sportie [/color] 5sp 4x4 2dr. 1?" Body + 4" Rocksportgear lifts, 31x10.50 Wildcats M/Ts, Manual Hubs, Yakima rack, basket. Redline gear oils http://www.cardomain.com/id/calapooyasMy beater, 03 Land Rover Freelander SE3
|
|
|
Re: ARB front lockers ***UPDATES?***
[Re: Calappoyas]
#505253
01/10/05 02:40 PM
|
Joined: Aug 2001
Posts: 5,527
Trail Leader
|
did that 5 years ago, got the exact same response.
95 Sportage w/welded and 5.89 geared dana 44's on 38.5" TSL's.- SADLY SOLD CURRENTLY - 2000 sportage, 5.38 gears, welded diffs, 35" tires, 5.5" lift http://www.cardomain.com/ride/341410
|
|
|
Re: ARB front lockers ***UPDATES?***
[Re: Dave Scott]
#505254
01/10/05 06:32 PM
|
Joined: Jul 2003
Posts: 1,062
Body Damage is Cool
|
I didn't even get a stupid catalog. <img src="/forums/images/graemlins/confused.gif" alt="" /> <img src="/forums/images/graemlins/drunk.gif" alt="" />
Is it the ARB Corp. in AU we need to contact?
'97 Sportage, 4" Lift 1" BL, 31" BAJA CLAWS, Rallye 4000s, Line-Xed Hood, Grille, K&N, 2.25" Exhaust, RS9000s, GPS... "What is IFS and where can I get some??" (outerlimits4x4.com)
|
|
|
Re: ARB front lockers ***UPDATES?***
[Re: MorganEstill]
#505255
01/10/05 10:46 PM
|
Joined: Sep 2003
Posts: 348
Mudrunner
|
already e-mailed them awhile back .. they replied with the same answer .. but i did not get any catalog neither .. and no info for the lockers..
|
|
|
|
