locking hubs

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

locking hubs #50625 03/28/03 06:30 AM

Joined: Dec 2000

Posts: 760

Winnipeg, Manitoba, Canada

oldsub86

Rock Warrior

A quick question that I am sure has been dealt with before, but here goes.
If I put a set of Aisin locking hubs on my 4Runner do I need a different set of the plastic center caps for my stock aluminum wheels or is it feasible to cut the existing ones to fit over the hubs? Or, does it look alright if you just run without the center caps?

1995 V6 SR5 5 speed 4X4 - 4Runner - dark blue

Entire Thread
Subject	Posted By	Posted
locking hubs	oldsub86	03/28/03 06:30 AM
Re: locking hubs	Anonymous	03/28/03 06:40 AM
Re: locking hubs	Anonymous	03/28/03 06:52 AM
Re: locking hubs	Arnold	03/27/03 09:58 PM
Re: locking hubs	Victor	03/28/03 04:38 AM
Re: locking hubs	Anonymous	03/28/03 04:45 AM
Re: locking hubs	Anonymous	03/28/03 04:46 AM
Re: locking hubs	Anonymous	03/28/03 05:27 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.477s Queries: 15 (3.475s) Memory: 0.6068 MB (Peak: 0.6397 MB) Data Comp: Off Server Time: 2026-06-19 20:54:58 UTC
Valid HTML 5 and Valid CSS