Power Brakes Question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Power Brakes Question #507870 09/30/04 02:24 PM

Joined: Oct 2002

Posts: 72

Charlotte, NC

Junkie

Getting the Wheeling Fever

Installing power brakes on my 86' CJ. Have a 6cyl. w/ a Weber Carb. Where can I pull vacume from? If you have a picture that's even better, unless it's pretty obviouse. There is no provision on the carb base as is on say a Ford 302. Any help would be greatly appreciated. Thanks in advance!

Entire Thread
Subject	Posted By	Posted
Power Brakes Question	Junkie	09/30/04 02:24 PM
Re: Power Brakes Question	Anonymous	09/30/04 06:58 PM
Re: Power Brakes Question	brightray	09/30/04 11:06 PM
Re: Power Brakes Question	Anonymous	10/11/04 06:35 PM
Re: Power Brakes Question	Anonymous	10/11/04 07:51 PM
Re: Power Brakes Question	Anonymous	10/11/04 08:26 PM
Re: Power Brakes Question	doc long	10/11/04 07:42 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.536s Queries: 15 (3.534s) Memory: 0.6036 MB (Peak: 0.6366 MB) Data Comp: Off Server Time: 2026-06-25 02:00:17 UTC
Valid HTML 5 and Valid CSS