Tightening torque for IFS steering box bolts?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Tightening torque for IFS steering box bolts? [Re: sege] #508149 10/01/04 05:11 AM

Anonymous

Unregistered

Factory torque spec. for an IFS steering gearbox to frame bolts is 105 ft./lbs.

Entire Thread
Subject	Posted By	Posted
Tightening torque for IFS steering box bolts?	sege	10/01/04 03:24 AM
Re: Tightening torque for IFS steering box bolts?	Anonymous	10/01/04 05:11 AM
Re: Tightening torque for IFS steering box bolts?	sege	10/01/04 07:12 AM
Re: Tightening torque for IFS steering box bolts?	ZUK	10/01/04 04:27 PM
Re: Tightening torque for IFS steering box bolts?	sege	10/01/04 06:54 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.216s Queries: 15 (4.212s) Memory: 0.5980 MB (Peak: 0.6310 MB) Data Comp: Off Server Time: 2026-11-07 08:45:06 UTC
Valid HTML 5 and Valid CSS