Problem after installing rear leaf prings....

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Problem after installing rear leaf prings.... #508834 10/02/04 11:03 PM

Joined: Dec 2002

Posts: 77

Norwalk, Ct

gcinque

Getting the Wheeling Fever

I just finished installing OME17 rear leaf springs on my 4rnr, when I took it for a test drive the truck started to shake and vibrate alot (at low spead). I went half a block and came right back. The truck is higher in the back than up front but I think it has to do with the angle of the drive shaft.
How can I fix this? Is it possible to rotate the rear axle up and align it all that way? Here is a picture of the drive shaft not aligned with the differential:
http://community.webshots.com/scrip...hotoID=194899072&security=QACxfS

Thank you for your input,

gcinque
03 Tacoma Xtra cab 4cyl 5spd
89 4Runner/Jasper reman 22RE/Auto SOLD
98 Tacoma Xtra cab 4cyl Auto SOLD

Entire Thread
Subject	Posted By	Posted
Problem after installing rear leaf prings....	gcinque	10/02/04 11:03 PM
Re: Problem after installing rear leaf prings....	4Crawler	10/02/04 11:42 PM
Re: Problem after installing rear leaf prings....	gcinque	10/03/04 12:03 AM
Re: Problem after installing rear leaf prings....	4Crawler	10/03/04 12:08 AM
Re: Problem after installing rear leaf prings....	whitetoy	10/03/04 12:16 AM
Re: Problem after installing rear leaf prings....	4Crawler	10/03/04 12:24 AM
Re: Problem after installing rear leaf prings....	gcinque	10/03/04 12:36 AM
Re: Problem after installing rear leaf prings....	4Crawler	10/03/04 03:03 AM
Re:Problem after installing rear leaf springs.... update	gcinque	11/04/04 08:29 PM
Re:Problem after installing rear leaf springs.... update	4Crawler	11/04/04 08:38 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: