Nope, leave the pan and crank in place. For the rear main you will have to go farther than trans removal, clutch assembly and flywheel will need to come off as well to access the rearmain carrier/retainer. The two rear most oil pan bolts will have to be removed because they screw into the retainer...which is bolted to the block with 5 12mm bolts (M8x125x16 comes to mind). Front is even easier, shouldnt have to remove the radiator to get the crank pulley off. Once that is done, simply pull the oil pump, push the old seal out from behind...tap new one in place and reassemble. If you notice a groove worn in the crankshaft pulley where the seal rides (on the crank itself for rear) you will need to sleeve-n-seal them or your work will be worthless.

~Darin <img src="/forums/images/graemlins/baby.gif" alt="" />


88' 4x4 *22R-EB Gen II*
87' $Runner *22R-EB Gen I*
85' Sillyca 22R-Esq

"I LIVE IN MY OWN WORLD...THEY KNOW ME WELL THERE"