Not sure the steering can be adjusted, but I would check the ball joints for excessive play first. There are some cone type bearings that control the steering in the knuckle area which could be loose or dying, but to be honest, I'm not sure how much it would help. (Had a friend who knew this stuff assemble mine when I did my rebuild). As for the seatbelt issue, I've had the exact same thought, but haven't invested much time or energy into investigating it further. In theory, you could find any shoulder harness that would clip in (another toyota donor part would work), and weld a nut to the roll bar (possibly have to drill out the bar first), and just attach it. Not sure if that little plastic piece hides a mounting point for a shoulder harness. <note to self> hmmm, ought to check that out </note to self>

Good luck, and let me know if you find anything good

Erik <img src="/forums/images/graemlins/cheers.gif" alt="" />


Twenty years from now you will be more disappointed by the things you didn't do than by the ones you did.

85 4Runner, New motor, Dual cases, 4.88's, ARB's (F/R), 4" lift, 33's, Warn M8000#.