I was in the wrecking yard today, and found one of the 4runners with that little plastic piece taken off, and lo-and-behold there is a threaded nut welded in place (just as I figured). Looks like it should be a bolt up type job. Not sure about the floor mount, but I'd imagine you could just use the stock mounting holes.

Erik <img src="/forums/images/graemlins/cheers.gif" alt="" />


Twenty years from now you will be more disappointed by the things you didn't do than by the ones you did.

85 4Runner, New motor, Dual cases, 4.88's, ARB's (F/R), 4" lift, 33's, Warn M8000#.