Don't know about the fender flare's but some options have been posted regardng "re-forming" them.

For the inner fender rubbing, try using wheel with a different offset that brings the tires further out.

I don't recall if Don's offset diagram shows actual measurements but if they do, then perhaps you can use them to figure out what offset you'll need.

Or you can temporarily put spacer's on to figure out how far out they need to be then replace the rim's with one that has the correct offset.


Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page