Is your Gen 1's low point the exhaust bend?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Is your Gen 1's low point the exhaust bend? [Re: HorribleHarry] #511083 10/09/04 03:16 AM

Joined: May 2000

Posts: 3,281

Vancouver, BC, Canada

don

Roll Me Over

Yup,

That's the factory low point, catches on everything.

I had a custom 2.25" exhaust installed, straightened and lifted up closer to the frame. Untouched on the Rubicon.

No negative results from the change.

Don `87 Mitsu 2dr, Rubicon survivor, GModified.

Entire Thread
Subject	Posted By	Posted
Is your Gen 1's low point the exhaust bend?	HorribleHarry	10/09/04 12:41 AM
Re: Is your Gen 1's low point the exhaust bend?	don	10/09/04 03:16 AM
Re: Is your Gen 1's low point the exhaust bend?	Lloyd Swartz	10/09/04 03:46 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.770s Queries: 16 (3.768s) Memory: 0.5968 MB (Peak: 0.6298 MB) Data Comp: Off Server Time: 2026-06-23 17:48:48 UTC
Valid HTML 5 and Valid CSS