My 3.0 manifold progress (pics)

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: My 3.0 manifold progress (pics) [Re: CORunner93] #512417 01/01/05 06:10 PM

Anonymous

Unregistered

For what it's worth, even if the runners did not seal back up completely with the rewelding, air going between runners is no big deal. Look at the siamesed runners that SLP made for the Chevy 350 TPI engines. I'm wondering why you didn't just have the manifold Extrude Honed to increase and smooth out the runners. Other than the cost.

Entire Thread
Subject	Posted By	Posted
My 3.0 manifold progress (pics)	Ganoid	10/12/04 07:36 AM
Re: My 3.0 manifold progress (pics)	1FastSS	10/12/04 06:40 PM
Re: My 3.0 manifold progress (pics)	BoostedInline6	10/12/04 11:54 PM
Re: My 3.0 manifold progress (pics)	Anonymous	10/13/04 12:05 AM
Re: My 3.0 manifold progress (pics)	Ganoid	10/13/04 12:33 AM
Re: My 3.0 manifold progress (pics)	Anonymous	10/13/04 12:38 AM
Re: My 3.0 manifold progress (pics)	Ganoid	10/13/04 01:04 AM
Re: My 3.0 manifold progress (pics)	Anonymous	10/14/04 12:03 AM
Re: My 3.0 manifold progress (pics)	Ganoid	10/14/04 05:11 AM
Re: My 3.0 manifold progress (pics)	Eck	10/14/04 04:14 PM
Re: My 3.0 manifold progress (pics)	Anonymous	10/13/04 07:56 PM
Re: My 3.0 manifold progress (pics)	Compressed	10/14/04 10:03 PM
Re: My 3.0 manifold progress (pics)	engnbldr	10/14/04 11:32 PM
Re: My 3.0 manifold progress (pics)	anthony1	10/14/04 11:57 PM
Re: My 3.0 manifold progress (pics)	oldsub86	10/15/04 01:30 AM
Re: My 3.0 manifold progress (pics)	bkg	12/07/04 04:55 AM
Re: My 3.0 manifold progress (pics)	bkg	12/30/04 08:42 AM
Re: My 3.0 manifold progress (pics)	Ganoid	12/30/04 09:12 AM
Re: My 3.0 manifold progress (pics)	kewlynx	12/30/04 09:23 AM
Re: My 3.0 manifold progress (pics)	Ganoid	12/30/04 10:00 AM
Re: My 3.0 manifold progress (pics)	CORunner93	12/31/04 05:32 PM
Re: My 3.0 manifold progress (pics)	Ganoid	12/31/04 10:16 PM
Re: My 3.0 manifold progress (pics)	bkg	12/31/04 11:09 PM
Re: My 3.0 manifold progress (pics)	CORunner93	01/01/05 01:45 AM
Re: My 3.0 manifold progress (pics)	Anonymous	01/01/05 06:10 PM
Re: My 3.0 manifold progress (pics)	Ganoid	01/02/05 12:56 AM
Re: My 3.0 manifold progress (pics)	Rauch_Off_Road	01/12/06 02:41 AM
Re: My 3.0 manifold progress (pics)	Rauch_Off_Road	01/13/06 01:22 AM
Re: My 3.0 manifold progress (pics)	Rauch_Off_Road	01/18/06 04:48 AM
Re: My 3.0 manifold progress (pics)	Ganoid	01/18/06 08:01 PM
Re: My 3.0 manifold progress (pics)	Rauch_Off_Road	01/18/06 09:52 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.516s Queries: 16 (3.513s) Memory: 0.6585 MB (Peak: 0.6960 MB) Data Comp: Off Server Time: 2026-06-12 16:16:18 UTC
Valid HTML 5 and Valid CSS