Stabilizer bar drop bracket

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Stabilizer bar drop bracket [Re: Wild_Bill] #512791 10/14/04 02:40 AM

Joined: Oct 2003

Posts: 23

Deron

Need a Spot

Yep, something like that. I meant panhard rod drop bracket. I know that drop brackets are available for 2nd gen 4Runners and they're bolt-on, no welding required. Any special reason why they need to be welded on the 3rd gen? Just curious.

2000 4Runner, OME 882 front coils w/ firm shocks, 891 rear coils w/ firm shocks, Sonoran Steel adjustable rear panhard bar, ARB Prado bullbar, Warn 9,000lb. winch, Amsteel synthetic winch line, Hella Lights, 265/75R16 BFG All Terrains

Entire Thread
Subject	Posted By	Posted
Stabilizer bar drop bracket	Deron	10/13/04 03:33 AM
Re: Stabilizer bar drop bracket	Wild_Bill	10/13/04 03:06 PM
Re: Stabilizer bar drop bracket	Deron	10/14/04 02:40 AM
Re: Stabilizer bar drop bracket	larsdennert	10/14/04 06:26 AM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.734s Queries: 16 (3.732s) Memory: 0.5989 MB (Peak: 0.6319 MB) Data Comp: Off Server Time: 2026-06-18 19:51:01 UTC
Valid HTML 5 and Valid CSS