Washer nozzle removal

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Washer nozzle removal [Re: CSA] #513363 10/14/04 06:30 AM

Joined: Apr 2002

Posts: 5,688

Port Orchard, Washington

Esquire812 Offline

Trail Leader

Open the hood, use a flat screwdriver or needle nose pliers to compress the little keepers and it will push right out the topside of the hood. Look at your new one, and you should be able to see what Im referring to about the keepers.

~Darin <img src="/forums/images/graemlins/baby.gif" alt="" />

88' 4x4 *22R-EB Gen II*
87' $Runner *22R-EB Gen I*
85' Sillyca 22R-Esq

"I LIVE IN MY OWN WORLD...THEY KNOW ME WELL THERE"

Entire Thread
Subject	Posted By	Posted
Washer nozzle removal	CSA	10/14/04 06:26 AM
Re: Washer nozzle removal	Esquire812	10/14/04 06:30 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.690s Queries: 16 (3.688s) Memory: 0.5957 MB (Peak: 0.6287 MB) Data Comp: Off Server Time: 2026-06-21 01:18:11 UTC
Valid HTML 5 and Valid CSS