|
|
|
|
Remove the transfer case shifter ?
#514772
10/18/04 12:48 AM
|
Joined: Feb 2003
Posts: 184
OP
Wheeler
|
I removed the 5 speed from the amigo saturday and want it to go back easy.How do you remove the transfer case shifter? I found one pressure plate bolt broken and it flying around in there.That is why when I started it up once with the clutch in and it jumped forward,the bolt mark is in the flywheel.Also my rear main seal had a dent in it,thats why its leaking.When someone pulled the motor or trans,they didnt think it needed the 2 top bolts where they meet up.But they did put the water cross over bracket in between the motor and tranny,NICE. <img src="/forums/images/graemlins/angry.gif" alt="" /> I'll be playing at the junk yard for the bolts.
90 Amigo,Front 10 bolt with powertrax locker,Rear Dana 44 with Detroit Locker at 5:38.1 R&Ps,Pro Comp MT's 33x12.5 on 15x8 black Rockcrawlers,with a 3" suspension lift.Pro Comp steering Stabilizer.Warn M8000 winch in a ARB bullbar.
|
|
Re: Remove the transfer case shifter ?
[Re: 90amigo]
#514773
10/18/04 01:32 AM
|
Joined: Apr 2000
Posts: 7,268
Isuzu Moderator
|
Umm...pull. <img src="/forums/images/graemlins/smile.gif" alt="" />
I ususally find that it comes out easier if you shift it into 4H.
Good Luck, Michael
|
|
Re: Remove the transfer case shifter ?
[Re: mlclark]
#514774
10/18/04 02:49 AM
|
Joined: Oct 2002
Posts: 2,285
Body Damage is Cool
|
St.Charles stocks those bolts for a few dollars. I ordered two, they charged me for two, but shipped 6. They said 6 was the minimum order but they only charge you for what you order. Pretty good.
CHRIS 98 Amigo, 92 Pup
need a pickup 1st gen fuel level sender
|
|
Re: Remove the transfer case shifter ?
[Re: CPOM]
#514775
10/18/04 04:00 AM
|
Joined: Apr 2002
Posts: 2,529
Roll Me Over
|
Yeah those bolts were real fun to get to. I can't say it wasn't tempting to not put the very top one back in. I put it in anyway. Now after the body lift it will be much easier the next time.
A gun in the hand is better than a cop on the phone.
98 Passport 33's, Supercharged, Calmini Bumper, rockbars, diff drops, Teralows, 4.77's, Aussie and ARB lockers, Safari snorkel, Optima red top.
|
|
Re: Remove the transfer case shifter ?
[Re: mlclark]
#514776
10/20/04 12:15 AM
|
Joined: Feb 2003
Posts: 184
OP
Wheeler
|
UMM Thanks. <img src="/forums/images/graemlins/lol.gif" alt="" />
90 Amigo,Front 10 bolt with powertrax locker,Rear Dana 44 with Detroit Locker at 5:38.1 R&Ps,Pro Comp MT's 33x12.5 on 15x8 black Rockcrawlers,with a 3" suspension lift.Pro Comp steering Stabilizer.Warn M8000 winch in a ARB bullbar.
|
|
|
|
|
|