What thread sealer did you use?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

What thread sealer did you use? #515765 10/20/04 12:19 AM

Joined: Feb 2003

Posts: 184

PSL,Florida

90amigo

Wheeler

The book I have shows Loctite 262 (Red) on the flywheel bolts.I have never used Red on anything.I always use blue.
What did you guys use?

90 Amigo,Front 10 bolt with powertrax locker,Rear Dana 44 with Detroit Locker at 5:38.1 R&Ps,Pro Comp MT's 33x12.5 on 15x8 black Rockcrawlers,with a 3" suspension lift.Pro Comp steering Stabilizer.Warn M8000 winch in a ARB bullbar.

Entire Thread
Subject	Posted By	Posted
What thread sealer did you use?	90amigo	10/20/04 12:19 AM
Re: What thread sealer did you use?	CPOM	10/20/04 01:04 AM
Re: What thread sealer did you use?	90amigo	10/20/04 01:52 AM
Re: What thread sealer did you use?	Anonymous	10/20/04 08:30 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.511s Queries: 15 (3.509s) Memory: 0.5985 MB (Peak: 0.6314 MB) Data Comp: Off Server Time: 2026-06-07 07:43:11 UTC
Valid HTML 5 and Valid CSS