Friends,

Well I did it. On my 98 there is only one box in there and my board is simillar to your pics but different. I had bought a cold heat thing and tried to use it , that thing is junk, I think I melted it inside. Anyway got out the old soldering iron and had a hard time getting the thing out but it finally came. The nec 31000S legs were a l:screwy: ittle different but I got them in and soldered it. It did not look pretty and I kind of made a small mess of the board. I put it back and thought it would explode but everything seemed to work. It was even a little louder which made me feel like I did it right.

I have a few questions. When I de-soldered and soldered it a little solder ened up touching some of the other contacts. I cleaned it up as much as I could. Are the connections on the inside of the board like a sandwich? If I did get some on the wrong spots how long would I know if something is screwed up. Everything seemed to work. Would I blow a fuse or would my rodeo just explode into flames? :-)

Well anyway thnaks for all the info. I hope I did it right!!!

Rob <img src="/forums/images/graemlins/kewl.gif" alt="" />