Dont worry about this job a chimpanzee with 2 brain cells could to it. Jack it up securely smack the old rod end off without chewing up the knuckle really bad. Measure the threads on the rod ends exposed past the clamp on both sides take the old ones out, screw the new ones in to the same point, tighten everything up and then drive it to your favorite alignment shop. There isnt going to be no dangerous or scary handling on the way to the shop.

Matt

04' Ford Ranger XLT 4.0l (Mr. sensible)

There are 10 kinds of people in this world that understand binary, ones that do, and ones that don't.