Replacing Oxygen sensor

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Replacing Oxygen sensor [Re: Nathan] #519287 01/01/07 08:17 PM

Joined: Nov 2003

Posts: 378

New York

NYT100

Mudrunner

I replaced my 2 Oxygen sensors today. The nuts were starting to disintegrate, but came off very easily with a little PB Blaster.

Toyota part # for Front Sensor- 89465-39835
(actual number on part is 89465-35360 Denso# 7900)

Toyota part # for Rear Sensor- 89465-39735
(actual number on part is 89465-35320 Denso # 7760)

97 T100, 32" BFG/AT, Warn hubs, stock height with Bilstein shocks, Optima battery

Entire Thread
Subject	Posted By	Posted
Replacing Oxygen sensor	sluggo	10/28/04 10:01 PM
Re: Replacing Oxygen sensor	surlynkid	10/28/04 10:35 PM
Re: Replacing Oxygen sensor	Nathan	10/29/04 02:47 PM
Re: Replacing Oxygen sensor	sluggo	10/29/04 03:48 PM
Re: Replacing Oxygen sensor	Nathan	10/29/04 04:08 PM
Re: Replacing Oxygen sensor	NYT100	01/01/07 08:17 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.378s Queries: 16 (3.377s) Memory: 0.6036 MB (Peak: 0.6366 MB) Data Comp: Off Server Time: 2026-05-26 05:55:03 UTC
Valid HTML 5 and Valid CSS