Noticed someone lookin for quick release door hinges above. I'd love to make em for you and make some money, but the truth is you already have em on your rig, you just need to take the hinges off, cut/grind/drill out the stock hinge pins, drill the hinge halfs to 3/8". Bolt each half back to the truck/door, line em up and drop in some 3/8" clevis pins from home depot. Total cost under $10 and about 2 hours of time.

As for the Tie Rods, I've got the prototypes finished, but am still working with a couple vendors to get things rolling. There will be an official announcement when they are ready.

Dallas